Insect Showcase Cabinet Large

Provided with 53 x 45 x 9 cm. Size drawer for keeping insects. Drawer of MDF with plywood bottom and removable glass top is lined with 8 mm thick EVA sheet and is glazed white from inside . Wooden batons with provision for in secticide fitted insde drawer. Glass top frame designed to make box airtight and pest proof. Fitted with index card holder and puller knobs. Finished in lacquer polish. Cabinet frame of plyboard finished with laminated sheet. Hinged door is provided with lock and handle and is lined with velvet.

• Cabinet with 12 drawers.
• Cabinet with 24 drawers.

  Insect Light Trap

Insect Light Trp With Electric Bulb: Made of mild steel with a box at the bottom for placing killing bottle / tray. Length of funnel 30 cm, diameter of funnel at the tail end 5 cm, size of box40 x 40 x 25 cm., Funnel coming into box for convenient collection of trapped insects into the tray. Provided with a shade to cover th whole equipment. Supports for stout construction and 5 meter long electric cord.
Insect Light Trap With Flourscent Tube : Like RI-72-01 but provided with 10 watt electric flourscent tube, instead of electric bulb .

Insect Light Trap With U.V. Tube : Like RI-72-01, but provided with 15 watt UV tube.

  Corcyra Cage

Made of MDF planks. Top lids fits well in the main box and detachable. Lid provided with 20 mesh iron wire-mesh secured with beeding. Provided with handle on sides. Well finished.

Size 43x23x12 cm.

  Corcyra Egg Laying Cage

  Corcyra Cage Waterproof Plywood

Made of water-proof plywood instead of MDF.. Top lids fits well in the main box and detachable. Lid provided with 20 mesh iron wire-mesh secured with beeding. Provided with handle on sides. Well finished.

Size 43x23x12 cm

  Inoculation Chamber Economy

Inoculation Chamber Economy size 100 x 60 x 60cm.
Inoculation Chamber Economy size 70 x 50 x 40 cm.
Inoculation Chamber Economy

  Observation Beehive

For Keeping 4----- frames of standard size. Provided with glass on both sides covered with detachable sliding wooden covers. Hole in base allows bees to move freely.

  Breeding Nest for Chrysopa

Teakwood frame with silk screen net on sides and collapsible cover on side. Cover can be fixed in position with help of levers. Top sliding plank of MDF covered with black cloth from inside and spirit polished from outside. A spare plank supplied for replacement Combs for removal of insects from plank. Beautiful spirit polish finish.

Size 60 x 30 x 30 cm.

  Insect Storage Boxes

For pinning of insects both top & bottom insides. Teakwood frame with sunmica top & plywood bottom is finished in lacquer polish. Top & bottom lined with 8 mm thick EVA sheet. Inside glazed white with art papper. Raised wooden wall with holes for insecticide, inside bottom to make box air- tight and pest proof. Fitted with brass hinges, index card holder and clips.

Size 53 x 45 x 9 cm.

Size 45 x 30 x 7.5 cm.

Size 38 x 25 x 7.5 cm.

Size 30 x 23 x 7.5 cm.

  Breeding Nest For Flies

Teakwood frame finished in spirit polish. 4 mm thick glass on top and fine wire mesh on three sides. Front with 13 cm rounded opening in th centre with black cloth sleeve. On right side a plumbiv pipe fitted for collection of flies.

Size 45 x 45 x 45 cm.

  Ligh Trap for Moth With Mercury Bulb

Ligh Trap for Moth With Mercury Bulb - Made of mild steel with a box having holes in bottom. Funnel over box to guide trapped Moth into the box. Tray provided under the box for collection of trapped moth. Mercury bulb provided on top of the funnel. Hanging arrangement for on-field use.

  Brown Plant Hopper Insect Rearing Cage

  Green Leaf Hopper Insect Rearing Cage

Framework of seasoned teakwood. Front door and top provided with non rattling glass and back and two sides with nylon wire screen supported by fine wire mesh mosquito proof. Wooden base covered with sunmica from inside

Size 45 x 45 x 65 cm.

  Box For Glass Specimen Tubes

Teak wood frame with plywood top & bottom is finished in spirit polish. Top and bottom lined with foam to protect specimen tubesfrom jerks. Fitted with hinges, clips and index card holder. Hard board sheet with 204 apertures for ½” dia tubes or 150 apertures for 3/4” dia tubes fixed inside.

Size- 12mmx50mm Tube Cap.- 150 tubes
Cabinet For Glass specimen tube box - 6 boxes

  Insect Collecting Net

Insect Collecting Net With Aluminium pipe handle with fine rubber grip at end, length of handle 75 cm. 75 cm long net fitted in ring through 5 cm wide cloth rim. Dia of bag at free end 25 cm. Ring dia 30 cm.

  Insect Setting Block

Made of Teak wood, 5 steps in different heights to pin up properly the insects & labels.

  ENTOMOLOGICAL PIN STORAGE BLOCK

Made of wood with 6 holes to store different sizes of entomological pins and keep the same handy

  Insect Stretching Board

Board adjustable along the support to obtain desired width for different size Insects. Board top & groove fitted with 8 mm thick EVA sheet. Groove adjustable from 0 to 12 mm with the help of brass fly-nuts. Material used is teakwood and finished in spirit polish.Size 35 x 12 cm.

  Plankton Net

Made of No. 12 standard silk bolting cloth, 125 mesh per sq. Inch. 89 cm long net suspended by muslin reinforcement to a 24 cm dia ring. Three braided leaders attached to swivel front. Tail of bag with 2 cm. Opening closed by tying cloth tape for placing glass vial.

  INSECT STRETCHING STRIPS BOX

Utility forfield where the insects can be stretched on the spot and can be securely kept inside. The box made of light weight white wood with tongs & grooves type joints. The top & bottom lined with 6 mm EVA sheet over which adjustable strips for stretching insects. The scripts can be fixed at one place with screw and fly uts, Folding hingis provided for separation of top & bottom. Index card frame clips & flexible handle are also provided.

Size - 38 cms x 28 cms x 10.5 cms with 10 srips

  Insect Light Trap Barles Type

Funnel tip provided with wire mesh over which wet soil containing insects is kept Electric bulb provided to dry the soil. A bottle is provided below the funnel for collection of insects.

  Magnascope Bench Magnifier

Especially designed for study of Zoological specimens, Botanical specimens and assembly and inspection in industrial purpose. The magnifier is fitted with optical glass lens dia M. 145 mm and Magnification 3 x mounted on stout stand, adjustable vertically and horizontally, allows the lens to swivel in all directions. The cast iron base of 200 x 200 x 75 mm provide extra stability to the stand during use. The circular flourscent lamp for giving cool shadow free and uniform illumination. Operated on 220V. Total height of the stand is 440 mm and linear movement upto 220 mm.