Oil & Petroleum Testing Apparatus

Pensky Martin Flash Point Apparatus

This is widely used for determination of closed cup Flash Point of Fuel Oil, cut back asphalts, other viscous material and suspension of solids having a flash point about 490C(1200F).The apparatus serve the purpose according method B. The apparatus consists of Brass Test cup with handle removable cup cover with spring operated rotating shutter having piolet jet, stirrer with flexible shaft. The assembly rests in Air Bath which is covered with Dome shape metal top. The cup is fitted with insulated handle and locking arrangement near cup plange. The assembly rests on a round shaped heater with different temperature regulation system suitable for operation on 220 Volts AC mains.

  Kinematic Viscometer Bath

This Viscometer bath is used to maintain the correct constant temperature for estimating Kinematic Viscosity of Oil and Petroleum Products in this type of bath various viscometers may be fixed as an internal part of the bath. The bath is rectangular shape.Inside tank is made of Stainless Steel Sheet. Two sides toughed glass window provided for full visibility of objects inside the bath. The bath is controlled by an electronic relay and contact Thermometer Or Digital Temperature controller cum indicator.Temperature range 50C above room temperature to 1000C. Accuracy plus minus 0.10C. Stirring is done by a FHP electric motor stirrer.Heating is done by means of tubuler type heater fitted on top of the bath.It is supplied with viscometer tube holders and stainless steel cover. Different size & accomodation are available as under without Viscometer tube.

 

  REDWOOD VISCOMETER

We specialize in providing Machines, which are well known for their robust construction, durability and excellent performance. Manufactured using quality components and material, these machines require minimum distortion and are the perfect solution to all the problems.

  Saybolt Viscometer

Used for determining the Viscosity of fuel oil and lubricating oil both thin & thick. The apparatus consists of Stainless Steel bath with oil cup which is centrally placed in a water bath. The bath has a lid which contains a water cooling tube, two handle with two stirrer blades, thermometer socket and a straight heater, stirring is done by turntable arrangement. A thermometer can also be inserted into the cup cover. The jets one universal and one Furol can be screwed to the cup by a handle(without strainer, withdrawal tube and glasswares). can operate on 220 Volts AC mains.

  Abel's Flash Point Apparatus

Used for determining of the closed cup Flash point of Petroleum Products,their mixtures,others liquids & Paints having Flash Point below 700C. The apparatus consists of one brass cup and cover fitted with shutter mechanism test flame arrangement(Oil test jet or Gas test jet) and stirrer, placed on a water bath made of copper sheet double walled. The outer jecket of the water bath is fitted with a stand. For electrically heated apparatus, heater is fitted to the stand the heat of which may be controlled different temperature regulation system of operated on 220 Volts AC mains. For Gas heated model the drum is heated by a burner. (without burner).

  Cleaveland Flash & Fire Point Apparatus

The appartus is used for determination of Flash Point & Fire Point of Petrolrum products except fuel oil with open flash 800C  specification. The apparatus consists of a cup heating plate to specific dimensions thermometer clip and test flame attachment with swivel joint for passing over liquid s Fire Point Appurface in the prescribed manner, heater is controlled by means of different types of regulators fitted to the apparatus suitable for operation on 220 Volts AC mains.

  Cloud And Pour Point Apparatus

This is made as a specified the pour point is the lowest tempertaure at which the oil will just fail to flow. The apparatus consists of a main cooling bath made of stainless steel sheet and stand unit with drain plug and cover with provision for fitting thermometer and a filling aperture for adding freezing mixture. A glass jar for containing oils, jacket, disc and gasket as specifed are also provided.

  Penetrometer Apparatus

This apparatus is used for penetration test on a wide variety of materials such as grease, Petroleum, Bitumen, Tar, Wax, Polish, food stuff, Rubber asphalts and pharmaceuticals Creams.A given force is applied over a given of a millimeter and expressed as penetration. It consists of a head support mounted on a vertical rod which can be adjusted for height. A rack and pinion and pointer assembly provides fine adjustment of a needle tip to sample and incorporates a slipping clutch mechanism which make reading of Penetration and subsequent resetting of a sample and accurate operation. The dial is graduated from 0-400 in on tenth millimeter Sub Division. The instrument is supplied with two samples containers made of aluminium. The penetration is the distance in millimeter that a standard needle penetrates vertically into a sample of the material under fixed conditions of loading time and temperature. This instrument measures the reading on round dial fitted on a Aluminium Painted stand having adjustable penetration needle, holder sample container and transfer dish.

  Distillation Apparatus

Made in accordance with specifications ,determination of distillation characterstic of Petroleum Products. The instrument consists of metal shield fitted with asbestos board to support distillation flask with GEARED height adustable device. It has slide for vapour tube and linning having glass window for Clear view of inside objects. The condenser bath is provided with Mild Steel black painted stand (without glasswares)electrically operated on 220 volts AC mains.

  Bomb Calorimeter Apparatus

Bomb Calorimeter Outfit provide a simple and inexpensive method for determination of heat of combustion of organic matter and the calorific value & sulphur content of solid & liquid fuel. The outfit supplied is complete for analysis as per the method recommended by British Standard Institution . All parts of the outfit have been finished and tested according to the specification laid down by Institute of petroleum and British Standard Institute. It comes with all essential accessories like, Bomb, Calorimeter vessel with bomb support, water jacket, stirrer, electronic firing unit with digital backman thermometer etc

Testing of Bomb : Each Bomb is tested before it leaves the factory in accordance with the requirement of the Institute of Petroleum and a works certificate is issued with each Bomb. This certificate gives the results of hydraulic testing under a pressure of 300 atmospheres (4400 p.s.i) maintained for a period of ten minutes without sign of leakage. The maximum deformation must not exceed the specified limits.

Calorimeter Vessel : The vessel is made of copper and is Chromium plated or S.S. It includes a Bomb support that ensures proper positioning of Bomb in the vessel.

Water Jacket : The outer container of Jacket is made of copper and is chromium plated both inside and outside or S.S. The is closed by an ebonite cover. A terminal block is fitted to the of the container so that connection can be made from the firing control.

Offset Stirrer: The stirring mechanism supplied gives sufficient turbulence for effective stirring whilst no heat is imparted to the calorimeter water. It consists of an impeller stirrer driven at a constant speed of approximately 800 r.p.m. The offset arrangement whereby the motor drives the impeller via a belt precludes any possibility of heat transference between motor and calorimeter Vessel Contents.

Electronic Firing Unit with Digital Backman Thermometer : For firing a calorimeter Bomb AC supply main (230 Volts 50 Cycles). It consists of two parts Viz Electrical Box and Electronic Box for Digital Thermometer reading. The Electrical Box is provided with socket for stirrer and terminals for the fuse wire. The unit has provision for test of firing wire resistance or open circuit. A left hand side bulb indicate the continuity while right hand side bulb indicates the open circuit (firing).

Crucible : Various types of crucible are available the standard supplied with the outfit being a stainless steel crucible of 8 ml capacity which fits in the standard support ring provided with the outfit

  Carbon Residue Apparatus (Rams Bottom)

It is used to determine the amount of Carbon deposit when an oil is evaporated under specified condition. The apparatus consists of a solid metal bath having 6 walls to accomodate cocking bulbs with heating elements around the bath the temperature which may be controlled by a Pyrometer depending upon the type supplied , 6 cocking bulbs are supplied with apparatus.

  Carbon Residue Apparatus (Conradson)

It is used to determine the amount of carbon deposit when an oil is evaporated under specified condition.The Carbon residue values or crude oil , residue etc. are useful in the manufacture of various lubricants. The Apparatus consists of Spun Sheet Iron Crucible 25cc capacity, sheet iron hood and sheet iron block on a stand with triangular wire bridge.

  Copper Strip Corrosion Test Apparatus

Used for detecting the presence of corrosive sulphur in petroleum products.The apparatus consists of a bath either dual purpose (500C & 1000C) or a boiling bath (1000C only) without stainless steel bomb and copper strips of definite size 6 bombs or 18 test tubes can be accomodate in each type of bath with different temperature regulation system to operate on 220 volts AC. mains.

  Reid Vapour Pressure Test Apparatus

Used to determine the vapour pressure of volatile non-viscous Petroleum products except liquified petroleum gases. The Vapour pressure is made up of brass heavily Chronium plated and consists of an air chamber and a gasoline chamber of definite dimensions and volume ratio. A pressure gauge of required range is fitted above the air chamber. The joints are made leak proof by neoprene washers. The water bath used is of such dimensions that the vapour pressure bombs may be immersed to at least 1 inch above the air chamber and maintained at a constant temparature range upto 1000C plus minus 20C.

  Multiple Redwood Viscometer Apparatus

Made of stainless steel bath big enough to accomodate 3 cups Redwood No.1 and 2 cups of Redwood No.II. Stirring is done by a FHP electric motor in the bath. It is supplied complete with 5 Oil cups fitted with Precision jets of Stainless Steel. Temprature is controlled by Energy Regulator

Optinal Accessories For Red Wood Viscometer No. I,II & Multiple Red Wood Viscometer :

1.  8C Low range Thermometer.
2.  9C Medium range Thermometer.
3.  10C High range Thermometer.
4.  Flask receiver 50 ml capacity.
5. Polished carrying wooden case for Red wood No.I.
6.  Temprature regulator (Energy regulator).
7.  Spare cup with valve for Redwood No.I.
8.  Spare cup with valve for Redwood No.II.
9.  Polished carrying wooden case for Redwood No.II.
10. Spare Heater for Red Wood No.I.
11.  Spare Heater for Red Wood No.II.
12.  Spare Ball valve for Red Wood No.I & II.
13.  Digital temprature controller cum indicator for Red Wood No I & II.

  Tar Viscometer

Determining the Viscosity of cut back Bitumen and road oil. It consists bath with cup of 10mm or 4mm erific and sleeve stirrer with ball lifting clip and ball. The assembly is kept on suitable stand with levelling screws. Suitable to operate on 220 Volts AC mains.

Electric heated (without control)
Electric heated with separate energy regulator control.
Electric heated with solid state electronic regulator.
Electric heated with voltage varric copper coil type.
Electric Heated with digital temperature controller cum indicator.
Multiple Tar Viscometer for 6 test cups with thermostate control & FHP electric motor         stirrer.
Multiple Tar Viscometer for 6 test cups Apparatus with digital temprature controller             cum indicator & FHP electric motor stirrer.

Optional Accessories :

1.  Spare silver plated orifice cup 10 mm or 4 mm.
2.  Flask receiver 100 ml capacity.
3.  Polished carrying wooden case.
4.  Thermometer 8C.

  Engler Viscometer Apparatus

Used for determing the Viscosity of lubricating and fuel oils in accordance with continental emulsions. It consists of Stainless steel water bath having oil cup with double walled lid.The water bath with stirring device mounted on stand . A thermometer clip to the water bath and the oil cup lid has a thermometer socket. The bath is fitted with 500 watts heater . It is supplied with wooden or ebonite valve to fit jet (without glaswares). Can operate on 220 Volts AC mains.

• Engler Viscometer Gas Heated Modal Without burner.
• Engler Viscometer Electric heated without any control.
• Engler Viscometer electric heated with separate energy regulater control.
• Engler Viscometer electric heated with copper coil type voltage varric.
• Engler Viscometer electric heated with digital temperature controller cum indicator.

Optional Accessories:

• Ebonite or wooden valve
• Flask 200ml capacity
• Polished wooden case.
• Thermometer 23C or 24C or 25C any one.

  Melting point Apparatus

This Apparatus determines melting point of petroleum products. it is made according .IT consists a rectangular block of aluminiium with built in electric heating element. The temperature is controlled by energy regulater .An adjustable lens is provided for viewing exact melting point supplied with capillaries.

Melting point Apparatus with energy regulater control Thermometer 63C.

  Softening Point Apparatus.(Ring & Ball Apparatus)

This apparatus is meant for determination of softening point of Bituminious materials according . Softening point is that temprature at which the speciman under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition . The apparatus consists of glass beaker,ring stand two steel balls with ring and ball guides & hand stirrer.

• Softening Point Apparatus(without glass beaker)
• Softening Point Apparatus(with glass beaker)
• Softening Point Apparatus (Ring & Ball Apparatus),with electric motorised stirrer and electric heater ,stand with temperature regulator.
• Softening pointapparatus with motorised stirrer , electric heated by concealed hot plate with temperature regulator.

Optional Accessories:

• Thermometer 60C.
• Thermpmeter 61C.
• Spare Concealed Hot Plate
• Spare centring guide and steel ball (Pack of 2 Nos).

  Drop Point Apparatus

This is used for determining drop point of greases . It is an indication of the critical temperature of the solid or semi solid to the liquid state. The apparatus consists of brass sleeve and case with metal cup and a glass boiling tube with cork fitted to a bath (Beaker) is provided . A stirrer is also provided in the bath.

• Drop Point Apparatus hand operated stirrer
• Drop Point Apparatus with FHP Motorised stirrer and electrical heater with energy regulater control IP-31.
• Drop Point Apparatus Same as above electric heated by concealed Hot plate.
• Drop Point Apparatus Same as above electric heated by concealed Hot Plate.

Optional Accessories:

• Thermometer 40C Low range.
• Thermometer 41C High Range.
• Thermometer 62C Drop Point Special.
• Universal Heater
• Spare Concealed Hot Plate.